
Factory Closing Down? Here’s What You Need to Think About
Closing a factory involves much more than simply emptying the building.
Whether you’re shutting down a manufacturing site, relocating production, downsizing, replacing machinery or preparing an industrial premises for its next use, there can be a lot to organise.
You may need to deal with:
- Redundant machinery
- Production lines
- Scrap metal
- Industrial equipment
- Racking
- Conveyors
- Electrical equipment
- WEEE
- Batteries
- Factory fixtures
- Waste materials
- Site clearance
CJ Metals can help businesses plan and manage the clearance and recovery side of a factory closure.
Based in Wakefield, we work across West and South Yorkshire and can undertake larger factory clearance, machinery removal and industrial projects nationwide.
What Happens When a Factory Closes?
Every factory closure is different.
Some businesses may simply need a few redundant machines removed. Others may need an entire production facility dismantled and cleared.
A factory closure can involve several different stages, including:
- Assessing the site and what needs to be removed
- Identifying machinery and equipment
- Planning dismantling and removal
- Removing production lines and heavy machinery
- Separating scrap and recyclable materials
- Removing WEEE and other equipment
- Clearing remaining fixtures and materials
- Loading and transporting materials away
- Recycling and recovering suitable materials
- Leaving the agreed areas ready for their next use
The earlier you start planning the clearance, the easier it can be to identify what needs to happen and which services are required.
What Do You Need to Remove From a Closing Factory?
A factory can contain a surprising amount of equipment and material.
Before arranging a clearance, it is worth making a list of everything that needs to be removed.
Redundant Machinery
This could include:
- CNC machines
- Presses
- Lathes
- Production machinery
- Processing equipment
- Fabrication machinery
- Packaging machinery
- Plant equipment
- Workshop machinery
CJ Metals provides machinery removal and industrial dismantling for businesses, with the approach depending on the size and type of equipment and the access available at the site.
Production Lines
A production line can involve much more than one machine.
You may have:
- Conveyors
- Processing equipment
- Control equipment
- Steelwork
- Electrical equipment
- Feed systems
- Packaging equipment
Where necessary, equipment can be dismantled into manageable sections before removal.
Racking & Storage Equipment
Factories and warehouses can contain large quantities of:
- Industrial racking
- Shelving
- Storage systems
- Workbenches
- Steel structures
- Mezzanine structures
These can form part of a wider industrial clearance.
Scrap Metal
A factory closure can produce significant quantities of recyclable metal.
This could include:
- Steel
- Stainless steel
- Copper
- Aluminium
- Brass
- Lead
- Cable
- Metal fabrication
- Machinery
CJ Metals can assess recoverable metals as part of a wider industrial clearance and arrange recycling and recovery where appropriate.
What Happens to Redundant Machinery?
Not all redundant machinery needs to be treated in the same way.
Depending on its condition, type and circumstances, machinery may potentially be:
- Relocated
- Reused
- Recovered for value
- Dismantled
- Recycled
The first step is to establish exactly what you have and what you want to happen to it.
For larger projects, CJ Metals can assess the machinery, access and removal requirements before the work is planned.
See our Heavy Machinery Relocation and Industrial Dismantling services for more information.
What About Scrap Metal From a Factory Closure?
Scrap metal can be an important part of an industrial clearance.
Instead of treating everything in a building as waste, it makes sense to identify materials that can be recovered and recycled.
Common metals found during factory clearances include:
Steel
Structural steel, machinery, racking, frames and general industrial equipment.
Copper
Cable, electrical components, pipework and other equipment.
Aluminium
Machinery components, fabrication and industrial equipment.
Brass
Valves, fittings and components.
Stainless Steel
Processing equipment, machinery and fabrication.
Separating recoverable materials can form part of the overall clearance process. CJ Metals provides scrap metal recycling alongside larger industrial clearance projects.

Don’t Forget WEEE and Electrical Equipment
Factory closures can also leave businesses with unwanted electrical and electronic equipment.
This may include:
- Electrical equipment
- Cables
- Control systems
- Computers and IT equipment
- Industrial electrical components
- Other WEEE
These materials should be dealt with through appropriate recycling and disposal routes rather than simply being mixed in with general waste.
CJ Metals also provides WEEE recycling for businesses.
What About Batteries?
Factories and industrial premises may have batteries associated with machinery, vehicles, equipment or other operations.
These need to be identified separately as part of the planning process.
CJ Metals provides commercial battery recycling, including different types of industrial and business batteries.
If batteries form part of your factory clearance, mention them when discussing the project so the appropriate arrangements can be considered.

Do You Need Factory Clearance or Full Decommissioning?
This is an important distinction.
You may not need a complete decommissioning project.
Factory Clearance
Factory clearance is generally concerned with removing unwanted machinery, equipment, scrap, fixtures and other materials from a site.
This might be appropriate when:
- A factory is closing
- A business is relocating
- A warehouse is being cleared
- Machinery is being replaced
- An industrial property is being prepared for sale or lease
Factory Decommissioning
Decommissioning can be a more involved process, particularly where a manufacturing facility is being completely shut down or prepared for redevelopment.
It can involve:
- Machinery dismantling
- Production line removal
- Industrial strip-outs
- Scrap metal recycling
- Waste removal
- Equipment removal
- Warehouse clearance
- Site clearance
CJ Metals already provides dedicated factory decommissioning services, including machinery dismantling, scrap metal recycling and industrial strip-outs.
Not sure which you need? Talk to CJ Metals about the site and what you want to achieve.
How to Plan a Factory Closure Clearance
A little planning at the beginning can make the clearance much easier.
- Make a List of What Needs Removing
Walk through the factory and identify:
- Machinery
- Production lines
- Racking
- Scrap metal
- Electrical equipment
- WEEE
- Batteries
- Fixtures
- General materials
Photographs can also be useful when initially discussing the project.
- Decide What Is Being Kept
Not everything necessarily needs to leave the building.
Identify equipment that is:
- Being relocated
- Being sold
- Being retained
- Being reused
This can help prevent unnecessary removal.
- Identify Anything That Needs Dismantling
Large machinery and production lines may not simply fit through the factory door.
Consider:
- Machinery dimensions
- Weight
- Access
- Doorways
- Loading areas
- Lifting requirements
- Transport requirements
CJ Metals’ industrial dismantling service considers machinery, structural elements, access routes and project requirements when planning a job.
- Think About Access
Tell your clearance contractor about any access restrictions.
For example:
- Narrow entrances
- Restricted loading areas
- Low ceilings
- Limited vehicle access
- Other businesses operating nearby
- Restricted working hours
These details can affect how the job is planned.
- Consider the Timing
If the factory is still operating, clearance may need to be phased.
You may need:
- Weekend work
- Out-of-hours work
- Section-by-section clearance
- Planned machinery removal
- Coordination with site managers
For larger industrial projects, CJ Metals can discuss the requirements and plan the clearance around the site.

What Can CJ Metals Help With?
CJ Metals can support businesses with the clearance and recovery side of a factory closure, including:
Factory Clearance
Full or partial clearance of factories, industrial units and warehouses.
Heavy Machinery Removal
Removal of individual machines or larger quantities of industrial equipment.
Industrial Dismantling
Controlled dismantling and removal of machinery, production equipment, racking and industrial structures.
Factory Decommissioning
Support with machinery removal, industrial strip-outs, scrap recycling and site clearance.
Recovery and recycling of suitable ferrous and non-ferrous metals.
Recycling of suitable waste electrical and electronic equipment.
Commercial battery recycling as part of business clearance requirements.
For projects where skips or larger RoRo containers are required.
CJ Metals already offers these services separately, so this page should act as the starting point and then direct customers to the service most relevant to their situation.
Factory Closing Down? Start Planning Early
One of the biggest mistakes businesses can make is leaving the clearance until the last minute.
If you’re closing a factory, moving premises or shutting down a production facility, it’s worth discussing the clearance requirements before the building needs to be empty.
That gives you time to consider:
- What needs removing
- What is being kept
- What needs dismantling
- What can be recycled
- What machinery needs specialist removal
- What access is available
- When the clearance needs to happen
For a larger project, photographs, a machinery list and basic site information can help when discussing the job with a clearance contractor.
Factory Closure Checklist
Before contacting CJ Metals, it can be useful to have the following information ready:
☐ Factory location
☐ Approximate size of the site
☐ Machinery that needs removing
☐ Production lines or conveyors
☐ Racking and steelwork
☐ Approximate amount of scrap metal
☐ WEEE or electrical equipment
☐ Batteries
☐ Any particularly heavy or awkward equipment
☐ Access information
☐ Preferred clearance dates
☐ Whether the site is still operational
☐ Whether any machinery is being retained or relocated
You don’t need to have every answer before contacting us. If you’re unsure what is involved, tell us what you’re dealing with and we can discuss the project with you. CJ Metals for Factory Clearance Services

Frequently Asked Questions
Can CJ Metals help if we’re closing an entire factory?
Yes. CJ Metals undertakes factory clearance, machinery removal, industrial dismantling and larger decommissioning projects. The exact service required depends on the size of the site and what needs to be removed.
How far in advance should I arrange a factory clearance?
There isn’t one fixed timescale because every factory is different. For a large closure, it makes sense to make contact as early as possible so the machinery, access, materials and timing can be assessed and the work planned.
Can you remove heavy machinery?
Yes. CJ Metals provides heavy machinery removal, including equipment such as CNC machines, presses, lathes, conveyors and other industrial machinery.
Can you dismantle machinery before removing it?
Yes. Industrial dismantling can be necessary where machinery or production equipment cannot be removed from the building in one piece. The requirements will depend on the equipment and site.
What happens to the scrap metal?
Suitable ferrous and non-ferrous metals can be separated and sent for recycling and recovery where appropriate.
Can you clear a warehouse as well as a factory?
Yes. CJ Metals provides industrial and warehouse clearance services, including removal of racking, equipment, machinery and scrap materials.
Do you work outside Yorkshire?
Yes. CJ Metals is based in Wakefield and provides business services across West and South Yorkshire, while larger industrial projects such as factory clearance, machinery removal and decommissioning can be undertaken nationwide.
Do I need a full factory decommissioning service?
Not necessarily. Some businesses need a straightforward factory clearance, while others require a more comprehensive decommissioning or dismantling project. CJ Metals can discuss the site and help establish what is required.
Can you remove WEEE and batteries during a factory clearance?
CJ Metals provides WEEE and commercial battery recycling. If these materials are present at your site, mention them when discussing your clearance requirements.
How do I get a quote for a factory closure?
Call Morgan on 01924 273649 or email morgan@cjmetals.co.uk. For larger projects, photographs, machinery lists and information about the site can help with the initial discussion.
Closing a Factory? Talk to CJ Metals
If you’re closing a factory, relocating production, replacing machinery or clearing an industrial site, CJ Metals can help with the removal and recovery side of the project.
From individual machinery and scrap metal to complete factory clearances and larger industrial decommissioning projects, we can discuss what needs to be removed and how the project can be approached.
Based in Wakefield. Serving West & South Yorkshire. Nationwide for larger industrial projects.
Call Morgan
01924 273649
morgan@cjmetals.co.uk
Request a free, no-obligation quote.